Skip to main content

Medicine capsules are made from which materials | Medicine table why having a straight line | Why the most medicines are in different colors.

Image
By Biswanath Panda


Medicine capsules are made from which materials | Medicine table why having a straight line | Why the most medicines are in different colors.



Whenever you are sick for some reason, you must have taken a variety of medications, such as tablets and capsules.  If you look at any medicine, in specific you can see that there is definitely a straight edge line on the tablet and a different color of the medicine.  So through today’s we will know why there is a straight line on the medicine tablet, why the color of the medicine is different and the capsules are made from which materials.  Be sure to read the complete article to the end to find out some interesting facts like this and follow to our site to read this type of articles


What is the straight line on the medicine tablet.

This straight line on the medicine tablet is made for a special reason.  This line on the medicine tablet is designed so that you can consume it in half and reduce its power consumption.  This line is usually found in more powerful medicine.  Just as we have to take medicine with less power, we can eat it in half with the help of this line.  Just like you took a medicine and it has a power of 1000 mg but the doctor told you to take 500 mg, you can break the tablet in to two parts by the help of the straight line and can consume in half.  But keep in mind that if there is no such straight line on any medicine tablet, it should not be eaten in half.


Why the color of the medicines is different

The different colors of each medicine are due to the fact that if a person is taking more medicine at the same time, then the color of the medicine can be known from which time to take which medicine and if the color of the medicine is the same, it is more likely that he will take one medicine twice by mistake. Side effects are also more common.  In addition of same medicine in double, color of medicine also affects the mental level. So for the difference in color of the medicines are made for the such reason.

Capsules are made from which materials

You must have taken the capsule, but you don't know what material is used to make the outer cell of the capsules.  The capsule has two parts, one is the body and the other is the cap.  The body is filled with medicine and sealed.  This cap and body are made of gelatin.  These gelatin particles are made from the bones and flesh of cows and pigs.  The gelatin made in our India is made only from the body of the cattle.


So we hope this information is must be helpful for you. Thanks for your valuable time spent to read us. Please follow us for new update. Thanks.

Comments

  1. Modadove.coDecember 4, 2021 at 1:49 AM

    The information in the post you posted here is useful because it contains some of the best information available. Thanks for sharing Modafil MD 200 Tablet Price Online. Keep up the good work.

    ReplyDelete
  2. ezmedicare4uApril 15, 2022 at 10:20 AM

    This post is so useful and valuable to increase our knowledge. I am happy that you have shared great info with us. Grateful to you for sharing an article like this.chicago medicare part a

    ReplyDelete
  3. Mary JamesMay 11, 2022 at 10:16 AM

    I admire this article for the well-researched content and excellent wording. I got so involved in this material that I couldn’t stop reading. I am impressed with your work and skill. Thank you so much.Essential Greens Products For Sale Online

    ReplyDelete
  4. UksleepingpillsonlineOctober 14, 2022 at 10:43 AM

    I always check this type of advisory post and I found your article which is related to my interest. Diazepam in 10mg for Sale in UK This is a great way to increase knowledge for us. Thanks for sharing an article like this.

    ReplyDelete

Post a Comment

Popular posts from this blog

How to test assay of Zinc Oxide by titration method step by step process

By Biswanath Panda
Zinc oxide (ZnO) is a chemical compound commonly used in the manufacturing of ceramics, glass, and other materials. One way to determine the purity of ZnO samples is by using a titration method. In this method, a known amount of ZnO is reacted with an acid, and the amount of acid required to neutralize the basic ZnO is measured. This can be used to calculate the percentage of ZnO in a sample. The titration method for determining the assay of ZnO involves the following steps: Prepare a solution of ZnO in water. A common starting concentration is 0.1 M. Prepare a standard acid solution. Hydrochloric acid (HCl) is commonly used with a concentration of 0.1 M. Place a known amount of ZnO solution in a titration flask. A typical starting amount is 25 mL. Add an indicator to the ZnO solution. A common indicator is phenolphthalein, which changes color from colourless to pink when the solution becomes neutral. Slowly add the standard acid solution to the ZnO solution, while stirring continuousl
1 comment
FULL ARTICLE

Assay testing procedure of ferric pyrophosphate by titration method

By Biswanath Panda
Assay testing procedure of ferric pyrophosphate by titration method Assay (By Titration Method) of ferric pyrophosphate Dissolve about 0.5 to 1.0 g of sample in 40 ml of distilled water in an iodine flask. Add 20 ml of concentrated hydrochloric acid. Mix, add 3 g of potassium iodide and then allow to stand for 5 min. Titrate the liberated iodine with standardized 0.1 M sodium thiosulfate, using starch solution as indicator to the end point disappearance of blue color produced by starch solution. Avoid vigorous mixing during the titration.  Perform a blank in a similar manner, omitting the sample.                  (T1-T2) × M × 0.05585 × 100 Fe (%) = ---------------------------------------                                    W                       Fe (%)  ×  745.21 FPP (%) = ---------------------------                              55.85 Where T1 = sample titre in ml T2 = blank titre in ml 0.05585 = atomic weight of iron × 10-3 745.21 = molecular weight of ferric pyro phosphate. 55.85 =
2 comments
FULL ARTICLE

How to calculate RSD in Excel 2021

By Biswanath Panda
In This Article we will explain how the RSD, Deviation and Average are calculated in Excel. Here we are explained very clearly and step by step for your easy understanding and we also included the screen shot of excel sheet and highlighted its each formula. Kindly read till the end and if any suggestion please share your feedback in comment box. Let’s start.   Step 1: We have selected around 10 different values to calculate the RSD, Standard deviation and average. Below the numbers are entered in the Excel. Left side Serial number for understanding and right side values. Step 2: First we have to calculate the average of values by typing the formula as shown in the below figure. Average(G4:G13) Then press enter key on computer key board. Step 3: Now we have got the average of values and the average is 145.1 as shown in the below figure Step 4: Now we have to add a new column to the right and each row we have to type the average of values as shown in the below figure.
2 comments
FULL ARTICLE

Assay Test Procedure for Titanium Dioxide (TIO2) by Titration Method.

By Biswanath Panda
Titration Method Analysis of Titanium Dioxide: Introduction: Titanium dioxide (TiO2) is a white powder commonly used as a pigment in various industries such as cosmetics, pharmaceuticals, and food industry. The purity of TiO2 is determined by the titration method. This method measures the amount of an acidic or basic reagent required to neutralize the sample. The aim of this analysis is to determine the purity of TiO2 using a titration method. Materials and Reagents: Titanium dioxide (TiO2) sample 0.1 M Hydrochloric acid (HCl) 0.1 M Sodium hydroxide (NaOH) Phenolphthalein Burette Volumetric flask Stirring rod Reagent Preparation: 0.1 M Hydrochloric acid (HCl): Dissolve 35.5 g of HCl in distilled water and make up to a final volume of 1000 ml. 0.1 M Sodium hydroxide (NaOH): Dissolve 40 g of NaOH in distilled water and make up to a final volume of 1000 ml. Phenolphthalein: Dissolve 0.1 g of phenolphthalein in 50 ml of 95% ethanol. Procedure: Prepare a sample of TiO2 by weighing 0.5 g of
11 comments
FULL ARTICLE

Assay Test Procedure for Calcium Carbonate by Titration Method | How to Test Calcium Carbonate Assay by Titration Method |

By Biswanath Panda
Definition of calcium carbonate or what is calcium carbonate Calcium is a mineral that is found in foods, specifically dairy, and stored in bones and teeth in our body. It is essential for growth and development of children and adolescents as it maintains strong bones and teeth while also assisting in muscle contractions, nerve stimulations and regulating blood pressure. Instrument or equipment required for analysis of assay content of calcium carbonate (CaCO3) Analytical Balance Pipette Burette Volumetric flask 250 ml Digestion flask 250 ml Watt man filter paper Ultra sonicator Chemical or regents required for analysis of calcium carbonate (CaCO3) Hydrochloric Acid Patton reader indicator 10 % Sodium hydroxide 0.02 M EDTA Volumetric Solution Chemical or Reagents Preparation 10 % Sodium Hydroxide Solution Weigh about 10 g of Sodium hydroxide in a baker and slowly dissolved in cold water and make up to 100 ml . Patton reader Indicator Weigh about
2 comments
FULL ARTICLE

SOP for Calibration of Glassware | How to Calibrate Analytical Glassware | QC Glassware |

By Biswanath Panda
  OBJECTIVE To lay down the Standard Operating Procedure for Calibration and Cleaning of Glassware. SCOPE This procedure is applied for Standard Operating Procedure for Calibration and Cleaning of Glassware. RESPONSIBILTY QC Executives QC Manager   PROCEDURE FOR CALIBRATION OF GLASSWARES Only Class A grade glassware are used for quantitative analysis.  This procedure is applicable for class-B grade glassware which are to be used for quantitative analyses Volumetric flasks Clean and dry the volumetric flasks to be calibrated and condition the flask to the temperature at which the calibration is being carried out.  Mark the glassware with a serial number (with sticker).  Place the volumetric flask to be calibrated, on the balance pan. Weigh and record the empty weight of volumetric flask.  Measure and record the temperature of water to be used for calibration.  Fill the volumetric flask to the mark with water.  Wipe the outside of the flask to dryness and weigh. Record the weight o
1 comment
FULL ARTICLE

Assay Test Procedure of Ferrous Sulphate by Titration Method

By Biswanath Panda
Ferrous sulphate can be determined by titration using a standard solution of potassium permanganate. The reaction between ferrous sulphate and potassium permanganate produces manganese dioxide, which can be quantified using a redox titration. Here is a step-by-step procedure for ferrous sulphate titration: Preparation of Standard Potassium Permanganate Solution: A standard solution of potassium permanganate can be prepared by accurately weighing about 0.1 g of potassium permanganate and dissolving it in a volumetric flask containing a known volume of distilled water. The resulting solution should be approximately 0.01 M. Preparation of Ferrous Sulphate Solution: A solution of ferrous sulphate can be prepared by accurately weighing about 0.1 g of ferrous sulphate and dissolving it in a known volume of distilled water. This solution will be used as the analyte in the titration. Preparation of Acid Solution: An acid solution, such as sulfuric acid, can be prepared by adding a few drops of
1 comment
FULL ARTICLE

Vitamin A Palmitate 250 CWS spray drying temperature for lab scale, Vitamin A Complete Details

By Biswanath Panda
Vitamin A Palmitate 250 CWS spray drying temperature for lab scale, Vitamin A Complete Details In this article we will cover and explain step by step the spray drying process and its requirement for VITAMIN A PALMITATE 250 CWS with the following points. What is Vitamin A What is Vitamin A Palmitate Why human body need Vitamin A Source of Vitamin Which food are rich in Vitamin A How much Vitamin A required per day (Chart) How does Vitamin A Palmitate Produced Which temperature we shall do the spray dry process for Vitamin A Palmitate 250 CWS Degradation of Vitamin A Palmitate 250 CWS Vitamin A storage condition What is Vitamin A Vitamin A is a fat soluble nutrient or vitamin which is naturally available in different types of food. Vitamin A is important for our body like other vitamins and minerals. It improves our vision power, immune system and reproduction system. Vitamin A is also very important for other organs like the human heart, lungs and kidneys. What is Vitamin A Palmitate Vi
1 comment
FULL ARTICLE

How To Calculate Z Score In Excel?

By Biswanath Panda
How To Calculate Z Score or Standard Score In Excel? Hi, welcome in this article we will explain step by step how to calculate Z score in excel, equation formula of Z score calculation and what Z score. What is Z Score? Z Score it is called as standard score and it is measured the distance from mean value of a data series and the unit of measurement is sigma. Z Score equation formula? Z Score calculation in excel step by step process? Method A                For example, purpose we have choose these following data table for calculation of Z score or standard score. Step 1: Now we need to calculate the mean or average data of sales by using Average function as shown in the below figure. Step 2: Now press the enter to get the average of the sales.         Step 3: Now we need to calculate the standard deviation data of sales by using Standard Deviation function as shown in the below figure. Step 4: Now press the enter to get the average of the sales. Step
1 comment
FULL ARTICLE

SOP for Transfer of Analytical Method

By Biswanath Panda
OBJECTIVE To have a Standard Operating Procedure for transfer of analytical and micro test methods and verification SCOPE This procedure is applied as the Standard Operating Procedure for transfer of analytical test methods. RESPONSIBILTY QC Executives QC Manager PROCEDURE FOR TRANSFER OF ANALYTICAL TEST METHODS The test methods will be received (along with validation details), verified for suitability and used for regular analyses A method transfer protocol will be prepared which will include the following The analytical method Method validation details Training and evaluation of analysts Verification of method performance Performance of analysis at recipient lab Evaluation of results between laboratories Conclusion of method transfer The responsibilities of transferring lab are briefly as follows Provide method specific training, if required Assist in analysis of quality control test results Propose acceptance criteria for method transfer Provide method validation details Provide d
1 comment
FULL ARTICLE